Surround mode: 2 x 80 W front 80 W Center 2 x 80 W rearĬertified, well-kept, very good, like new condition. Sound Field Program: 3 Cinema / 3 Fourths 3D / 3 Music In addition, the bass can be increased by 30% via a loudness function. Sound Field programs make your living room or music room the purest concert hall. This high-end HiFi AM / FM RDS 5.1 home theater receiver combines form and function for a convincing and outstanding sound experience, with 400 watts of surround-mode performance, distributed across the 5.1 system, which features rich bass and crystal clear highs, and in the differently adjustable You can connect up to 5 speakers and an active subwoofer. It has 2 digital inputs and 5 analog audio or video inputs. Sony Digital Audio / Video Control Center With surround formats like Dolby Digital, ProLogic II and DTS. The illustration above provides you with the ideal set-up and sound mode setting for a 2-speaker set-up or for all speakers (5.1 set-up).High quality hifi AM / FM RDS 5.1 home theater receiver If applicable, try selecting a different size (small or large) speaker.Increase the volume level of the speakers.Perform a Test Tone operation to verify that all speakers are working.Pístroj má 5 digitálních vstup, 4x audio v. If your A/V receiver has an Auto Calibration function, try using it to setup the appropriate sound settings. 6.1 domácí kino Receiver STR-DB2000 QS of Sony QS-série s velmi dobrou kvalitou zvuku a surround formát, jako je Cinema Studio EX, Pro Logic 2, Dolby Digital EX, DTS-ES, DSP a DCS. Built for sound The STR-ZA5000ES is Sony’s best-sounding AV receiver, featuring a new power transformer that is over 50 larger than the one in the STR-ZA3000ES, a new Linear Wide Band Power Amplifier and gold-plated speaker terminals, and a redesigned, reinforced chassis.If you still have the same problem after changing the sound mode, make sure the speakers are securely and properly connected to the A/V stereo receiver.If the channel is broadcast in digital 5.1 audio, change the sound field back to AFD Auto to enjoy the digital surround sound audio as it was actually recorded.
This creates a simulation of 5.1 digital audio. In order to hear audio from all speakers, make sure to change the sound field to DPLII. When watching one of these TV channels, only the front speakers will output audio. NOTE: A majority of cable and satellite TV channels are broadcast using two-channel analog audio. Try selecting a different sound mode on the A/V receiver, such as the Dolby® Pro Logic II (DPLII).Manuals are posted on your model support page.
IMPORTANT: If necessary, consult the operating instructions for your model Audio/Video (A/V) stereo receiver to obtain model-specific information about performing any of the steps below. Follow these steps to try to resolve this issue. If you are not able to get any surround sound effects when playing audio, there may be a problem with your hookup or there may be an incorrect setting.
0 kommentar(er)
